Firmware

Firmware Update

Starts downloading the firmware to the ECU. This removes the calibrations.

Firmware type

Specifies the type of firmware that will be loaded into the ECU. You choose FW type depending on the crankshaft trigger.

Technical information

Here is the technical information from the permanent memory of the ECU: hardware version, configuration of the outputs, presence of options, additional modules, etc.

Calibration Protection

This feature includes read protection for calibrations.

When you turn on protection, you set a password. After that, zero values are read from the ECU.

To disable protection, you must enter a password. There is one attempt. If you enter the wrong password, all calibrations will be resetted and protection is disabled.