Skip to content

Coils and injectors

Coils and injectors are connected sequentially.

  • cylinder 1 - INJ1, COIL1
  • cylinder 2 - INJ2, COIL2
  • cylinder 3 - INJ3, COIL3 etc.

Firing order is set in Parameters

Batch mode

One coil works on 2 cylinders at the same time.

This is possible on the even number of cylinders.

How to get cylinder pairs:

Get the firing order: 1-4-2-5-3-6

Split it into 2 lines:

1-4-2-
5-3-6

Pairs of cylinders will be in columns: 1+5, 4+3, 2+6

VAG coils

Power and ground wires should be not less than 1mm2

It is recommended to connect the ECU GND wire to a separate bolt, next to the ECU ground connection.

Mercedes M113 twin spark