Pressure sensors
Pressure sensor need a 5V supply.
Manifold air pressure (MAP)
Connects to DAD input
The MAP must be installed in the manifold, just behind the throttle plate.
Warning
Do not install the sensor tip upwards. Condensed water will damage the sensor.
Warning
MAP should not be placed near the runners. Pressure waves will distort the MAP readings.
The combined MAP + IAT must be installed in the air stream and not too close to the walls to ensure correct temperature readings.
Fuel pressure sensor
Connects to analog input.
Should be installed into the fuel rail.
Compensates for pressure drops at peak power, cornering, and peak acceleration.
The sensor stabilizes the operation of the injection system and allows diagnosing the fuel system.
Highly recommended for installation.
Oil pressure sensor
Connects to analog input
Provides engine protection when oil pressure drops.
Gas pressure sensor
Connects to analog input