190e automatic with EMS2

VassilisFloros

analyzer-dh-invent-4faa-20260908-214258.csv

7MB

analyzer-spark-invent-4faa-20260908-213933.csv

7MB

updated log files

VassilisFloros

Update
The problem was because of vibrations of the crank hall sensor

VassilisFloros

Hello Yaroslav
My DBW it passes the calibration but when I press the throttle after 70% the dbw goes above the uper red line and stalls.
Do I have wrong PIDs?
Is this related that I can't set the idle correctly?

JHM

Record a log with pressing the pedal from 0 to 100 very slowly (it should take >10 sec)

« Previous Page