Idle & Fullload Problems

Hector_Moriceau

Hello, I have a strange problem. My idle speed is very high.
But, looking at the guide, I noticed two major problems that are the cause.
1 my idle sensor is activated when I don't press on the throttle and is activated when I do. shouldn't it be the other way around?
I'd like to point out that I didn't connect the idle cable because I don't have the pin.
2 the fullload remains permanently active.

JHM

It's opposite to the way it should be. It means that your car have unusual switches wiring.
You can switch to the "Custom engine settings", and change inversion toggle:

Hector_Moriceau

Thank you for your feedback, yes indeed. for my part I had to deactivate this option for it to return to normal. so the idle works perfectly. however I no longer see fullload activated even at the bottom of the pedal. otherwise I have an idle of 2200RPM I sasi not what to do. yet I did not connect the idle cable because I do not have the pin on my car.

Hector_Moriceau

On my 190e, it's a mechanical adjustment with a screw for the idle. do i have to remove it completely? or do i have to connect it to my additional air valve? i specify that it's a 2-pin.

JHM

Hector_Moriceau
Surely it's better to connect a valve and have a proper idle regulator.
Otherwise you can try adjusting the screw.