Hello, i had a older version of jetronic with 3 pins icv. It was kinda faulty, stucking and weird acting at all. I bought a new one with 2 pins and connect it to the invent ecu. Now its holding idle better and stable, but on 900 rpms, when it was before somewhere around 750 rpms. Second thing that i dont like at all is start rev. After start its rev to 1500rpms + and then slowly fall dont back to 900 rpms. Some jetronic versions did this too, but i prefer not to do that, can this be set up somehow?
And the last thing, i think that my rpms are falling kinda slowly at all, before this icv swap, rpms falled down almost immediately. Now it wants some time.
I sprayed brake cleaner and startspray around all air hoses, but there is no air leak. Its just probably caused by bigger icv, that engine was mean to had.
Can atleast some of this problems be setted?