Bluetooth

Larttis

Hello, I tried to connect to Bluetooth and it said connected and the com ports were shoving, but the invent software was just searching and did not connect. I could not change the name or the pin because no connection. Map sensor was shoving 5v and the jetronic ecu was getting 12v.

Larttis

K-line is not connecting to the software, the Connector is getting 12v and k-line was getting 10,8v. I dont understand

JHM

Record a video of what you're trying to do, we'll check

Larttis

JHM got it working, I didn't realise I had to update the firmare to the ecu. altought the map is showing error.

JHM

Larttis
check if the ECU is powered down when ignition is off
check MAP voltage on stopped engin, should be around 4v